User guide

38 SCOPIA 400/1000 Gateway User Guide
Initial Gateway Configuration
4 Press any key and then press Enter.
The default network properties screen appears.
5 At the prompt, enter P and press Enter to select “change the
configuration software password.”
The Enter user name prompt appears.
6 Type the user login name for which you want to change the
password and press Enter.
The default user name is admin. This is the user name that
allows you to access the Gateway interface.
The Enter new password prompt appears.
7 Type the password you want the user to use to log in to the
Gateway interface and press Enter.
There is no default password.
8 The network configuration Main menu re-appears.
9 Enter Q and press Enter to exit.
UPGRADING GATEWAY
SOFTWARE
Software upgrades for the Gateway include the software components that are
upgraded for the new version and a utility to upload the software to the unit.
This section describes how to upgrade the software. For more information, see
the Using the RADVISION Software Upgrade Utility chapter.
 Procedure
1 Download the upgrade software to a host that can access the
Gateway.
2 Unzip the upgrade file.
3 Double click the upgrade.exe file.
The
RADVISION Software Upgrade Utility appears.
4 In the Target IP field, type the IP address of the Gateway for
which you want to upload the software.
5 In the User Name field, type the software user name.
This is a global login name that the upload, upgrade, and Telnet
utilities use to log in to the Gateway software. It can also be
used to access the Administrator interface. The default user
name is admin.