User guide

Using the RADVISION Software Upgrade Utility 189
7
USING THE RADVISION SOFTWARE
UPGRADE UTILITY
This section describes the RADVISION Software Upgrade Utility, and includes
the following topics:
 Introduction
 Launching the Utility
 Upgrading Software
INTRODUCTION The RADVISION Software Upgrade Utility is an interactive GUI interface that
enables you to upgrade
RADVISION software installed on RADVISION devices.
The
RADVISION Software Upgrade Utility enables you to select files to be
uploaded via a network or modem connection to the
RADVISION device. You
can select either to perform a typical upgrade which includes all the new files or
a customized upgrade which enables you to select which files to upload.
The upgrade files are uploaded and then burned into the memory of the
RADVISION device.
Before You Begin
RADVISION devices automatically save configuration settings before a software
upgrade takes place. However, it is recommended that you save all configuration
information using the Export button in the
RADVISION device web interface
toolbar. You can retrieve all these settings after the software upgrade is complete
by using the Import button in the
RADVISION device web interface toolbar.