User guide

184 SCOPIA 400/1000 Gateway User Guide
Uploading a Message to a Device
UPLOADING A
MESSAGE TO A
D
EVICE
This section describes how to upload audio messages from the Audio Message
Utility to a target device.
 Procedure
1 From the Actions menu, select Upload Messages To Target.
The Upload dialog box appears.
2 In the General Information section, enter the IP address of the target
device.
3 In the Login Information section, enter the user name and password of
the target device, as configured in the device network configuration
settings.
4 (Optional) Modify the read and write community settings for the target
device as follows:
 Click Customize SNMP Settings.
The Customize SNMP Settings dialog box displays.
 Enter the required read community and write community values and
click OK.
The default read and write community settings are RVGET2 and
RVSET2 respectively.
5 Click Upload Messages.
The Upload in progress window appears, and the message files are
uploaded and burned onto the target device.