User guide

182 SCOPIA 400/1000 Gateway User Guide
Recording a Message
RECORDING A
MESSAGE
This section describes how to record a new audio message.
Note There is no limit on the length of individual message files, but the total
length of all WAV files should not exceed 250 seconds. An FLS file should not
exceed 2000 KB.
 Procedure
1 From the Message menu, select New Recording.
The New Recording confirmation box appears and the MSsound
recording utility is invoked.
Note MSsound is invoked by default. You can use any recording software
that supports the WAV format.
The new message must be recorded in the following formats:
 WAV file
 G.711 (CCITT)
 µ-Law
 8-bit
 Sampling rate 8kHz
2 Use the recording software, to record a new message and save it to the
RADVISION Audio Message Utility directory.