User guide

144 SCOPIA 400/1000 Gateway User Guide
Configuring Port Settings
 Procedure
1 In the Network Specific Facility (NSF) field, choose Custom.
2 Click Configure.
The NSF Configuration dialog box appears. You can configure up to four
NSF information elements.
Note You can only configure the NSF information elements (NSF IEs) if
you set the Interface field in the Physical Interface section of the PRI Port tabs
to T1 and set the Country field to US. All outgoing Q.931 setup messages will
contain the NSF IE.
Table 3-27 Pre-configured NSF Settings
Pre-configured Setting Information Element (IE) Octets
IE 1 Octets IE 2 Octets
3 3.1 3.2 3.2 3.2 4 3 4 5
AT&T Accunet 4 A1 32 38 38 E6
AT&T Megacom 4 A1 32 38 38 E3
AT&T Megacom 800 4 A1 32 38 38 E2
AT&T SDDN 4 A1323838E1
AT&T Accunet + SDVG 4 A1 32 38 38 E6 0 49 0F
AT&T Megacom + SDVG 4 A1 32 38 38 E3 0 49 0F
AT&T Megacom 800 + SDVG 4 A1 32 38 38 E2 0 49 0F
AT&T SDDN + SDVG 4 A1 32 38 38 E1 0 49 0F
MCI VNET 4 A9 32 32 32 E1
Sprint VPN 4 A9 33 33 33 E1