User guide

126 SCOPIA 400/1000 Gateway User Guide
About Gateway Services
3 In the Bonding Synchronization field, choose a bonding
synchronization setting.
Note Choose Prolong only for endpoints that use non-standard synchronization
mechanisms.
4 Click OK to save your setting and close the Advanced dialog box.
5 Click the Port Specific tab.
6 In the Enable service in ports section, select the PRI ports that are
enabled for this service.
7 Click OK.
The Gateway interface uploads your settings to the services database.
DELETING GATEWAY
SERVICES
In the Settings tab, you can delete existing services.
 Procedure
1 In the Gateway interface, on the sidebar, click Gateway (if not already
selected).
2 Click the Services tab.
3 Select a service and click Delete.