User guide

Configuring the SCOPIA Gateway 125

About Gateway Services

6 In the Call type field, select the call type for this service: Video or Voice.

7 In the Bit rate field, select the maximum bit rate you want for this

service. If you select Auto, the Gateway determines the ISDN or serial

call rate according to the bearer capability received in the setup message

from the IP network endpoint.

Note The Auto setting is for video calls only.

If the IP network endpoint has a configured bit rate that is not one of the

options listed in this field, the Gateway uses the default bit rate

configured in the Default Service Bit Rate field in the Advanced section

of the Settings tab.

Note If the Ignore caller bearer rate and force service rate field is selected

when you define a bit rate for a service, the service uses the defined bit rate.

If the Ignore caller bearer rate and force service rate field is deselected, the bit

rate you define serves as the maximum limit for that service.