User guide

104 SCOPIA 400/1000 Gateway User Guide
Configuring Gateway Settings
Incompatible sw
version install
An attempt to burn a version of the Gateway
software onto incompatible hardware
occurs.
Warning
Loss of Ethernet The network returns after going down.
Indicates the time at which the network was
restored.
TRUE Critical
FALSE Clear
Loss of ISDN A state change occurs for each enabled
ISDN line.
TRUE Critical
FALSE Clear
Max resource
meter
A call could not be established because of a
lack of one of the following resources—
CPU, audio transcoder, DTMF detector or
T.120 resources.
Warning
Network problem A problem occurs on the network. TRUE Major
FALSE Clear
Power-down The Gateway is shutting down. Information
Power-up The Gateway has started to operate. Information
RAI status A change in RAI status occurs. TRUE Warning
FALSE Clear
Snmp request
with invalid
community
An SNMP request uses community values
that do not match those of the Gateway.
Warning
Snmp write
request
An SNMP write request is sent to the
Gateway.
Information
User account
locked
A user account is disabled. Warning
User logged in A user successfully logs in to the system via
the web interface.
Information
Table 3-9 PRI Gateway SNMP Trap Event Types (continued)
Event Type Trap is sent when: State Severity