User guide

102 SCOPIA 400/1000 Gateway User Guide
Configuring Gateway Settings
GATEWAY EVENT
TYPES
Table 3-9 lists proprietary RADVISION SNMP trap event types for the PRI
Gateway, as detailed in the RvTrapEventType textual convention.
Table 3-10 lists SNMP trap event types for the Serial Gateway, as detailed in the
RvTrapEventType textual convention.
Note In certain cases, after a problem that caused a trap to be sent has been
solved, an identical clearing trap is sent to indicate that the problem has been
solved. The severity of the clearing trap is always 0. The trap OID and the
RvTrapEventType value of the clearing trap are identical to those of the original
trap sent when the problem occurred. The sending of a clearing trap is indicated
by a severity level of “Clear.”
Table 3-9 PRI Gateway SNMP Trap Event Types
Event Type Trap is sent when: State Severity
Abnormal
disconnect
A call has disconnected for a reason other
than normal, busy or no answer.
Warning
Authentication
failure (specific)
A login attempt to the web interface fails
due to incorrect user name or password.
Warning
Bad video Corrupt or empty video packets are present
in the Gateway. Includes the ID number of
the call during which the event occurs.
TRUE Minor
FALSE Clear
Call from
non-peer H.323
entity rejected
The Gateway has rejected an incoming IP
call because the source does not appear in
the peer list.
Warning
Call from peer
rejected due to
capacity
A call from a peer has been rejected because
the Gateway does not have enough
resources available.
Warning
Call to peer failed
- peer list empty
A call to a peer has failed because the peer
list is empty.
Major
Call to peer
rejected - trying
alternate
A call to a peer has been rejected and the
Gateway is searching for an alternate peer.
Warning