User guide

94 SCOPIA 400/1000 Gateway User Guide
Configuring Gateway Settings
10 In the IVR address field, enter the IP address for the IVR system on the
external device.
11 In the Port field, enter the port number for the IVR system on the
external device. The default port setting is 1620.
CONFIGURING
OUTGOING CALL
DELIMITERS
In the Delimiters section of the Settings tab, you can configure outgoing call
delimiter characters.
 Procedure
1 In the Gateway interface, on the sidebar, click Gateway (if it is not
already selected).
2 Click the Settings tab.
3 Click the Delimiters button.
4 In the Second number delimiter field, enter the character used as a
second number delimiter for dialing more than one ISDN number in
setting up a 2B call. You can use the pound sign (#), asterisk (*) or
comma (,) as a delimiter in outgoing calls only. Not available in
Gateway S40 SP.
5 In the TCS4 extension delimiter field, enter the character used as an
extension number for TCS4 outgoing IP-to-ISDN call routing. You can
use the pound sign (#), asterisk (*) or comma (,) as a delimiter in
outgoing calls only. This setting does not apply for voice calls.
Note Since the comma cannot be used in the Party number field of the MCU
Conference Control interface, we recommend that you do not use the comma
as a second number delimiter or as a TCS4 extension delimiter.