User guide

RADVISION | User Guide Call Management | 41
Video Camera Presets
The Preset function allows the user to save camera positions (up to a maximum of 99
positions) to enable quick selection of a certain camera frame.
To save a preset:
Step 1 Set the desired camera position and adjust the video zoom.
Step 2 Press the MEMO key on the remote control followed by a memory location
(from 01 to 99); during the operation the system does not give you any
feedback, but at the end a message will appear notifying the stored position.
To recall a memory location:
Step 1 Press the SEL remote control key
Step 2 Enter the memory location number corresponding to the desired preset.