User guide

RADVISION | User Guide System Installation | 17
Connecting the RADVISION SCOPIA XT1000 Digital Microphone Array Pod
See Figure 2 below.
Figure 2. Connecting the RADVISION SCOPIA XT1000 Digital Microphone Array Pod
Step 1 Connect the Microphone Pod output to the rear panel of the system.
Step 2 In case a second Microphone Pod is used: connect second Pod output to
first Pod input.
Note:
Use two (2) Microphone Pods (maximum).
Connecting the RADVISION SCOPIA XT1000 - Sony Camera
See Figure 3 below.
Note:
The optional second camera can be the Standard Camera or the Sony Camera.
Figure 3. Connecting the RADVISION SCOPIA XT1000 - Sony Camera