User guide

'Initial Configuration' | 46
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Figure 2-8 Generic Server
Step 6 Press Save.
Configuring ISDN Connectivity
When dialing an ISDN call from SCOPIA XT1000 using a RADVISION Gateway, the user can dial the
ISDN number as it is, with no IP address or delimiters. This feature is available in automatic mode
when a RADVISION Gateway is present, with or without a gatekeeper. User experience is the same
as using an embedded board, in all possible network configurations.
Procedure
Step 1 In the Administrator settings menu select Protocols.
Step 2 Scroll to ISDN.
Step 3 Select the General page.
Figure 2-9 Peer-to-Peer Mode
Step 4 Set Enable to Yes to enable ISDN.