User guide

'Initial Configuration' | 31

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Step 3 Set PODS to output to Yes.

Step 4 Select Monitor > General.

Step 5 Set Number of Monitors to HD2.

Step 6 Press Save.

Upgrading to the XT1000 with Embedded MCU

Procedure

Step 1

Purchase the MCU4 or MCU9 option.

Note: We recommend purchasing the High Bandwidth Option (12Mbps) when using the

embedded MCU. If the High Bandwidth option is not enabled, the MCU will send out a

lower resolution according to the standard 4Mbps total bandwidth.

Step 2 Enable the license as explained in Installing and Enabling an Option License page 13.

Step 3 Set up a call to check how the system works.