User guide

'Initial Configuration' | 30
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Step 4 Set the fields as required.
Step 5 Press Save.
Configuring Audio Outputs
Procedure
Step 1
In the Administrator settings menu select I/O connections.
Step 2 Scroll to Audio - Outputs.
Step 3 Select the General page.
Step 4 Set the fields as required.
A table in the GUI will show configuration settings, as illustrated in Settings for HDMI Recording
page 30.
Step 5 Press Save.
Settings for HDMI Recording
Procedure
Step 1 In the Administrator settings menu select I/O connections.
Step 2 Select Audio - Outputs > General.
Field Name Description
AGC Enables/disables Automatic Gain Control. The AGC reduces the volume
if the audio is strong and raises when it is weak.
Noise reduction Enables/disables reduction of ambient noise in a conference room (e.g.:
coughing, paper rustling, etc.).
Field Name Description
SPDIF/HD camera to output If enabled, allows to hear locally the audio input.
PODs to output If enabled, sends the transmitted audio to the
output (e.g.: to a recorder). Disabled by default, to
avoid echo effects when a monitor is connected to
HD1.
Rx remote to output If enabled, sends the received audio to the output
(e.g.: to a recorder).