User guide

'Initial Configuration' | 28
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Step 4 Set the fields as required.
Step 5 Press Save.
Configuring Other Audio Inputs
You may also access this page from a previous screen in the configuration.
Procedure
Step 1 In the Administrator settings menu select I/O connections.
Step 2 Scroll to Audio - Inputs.
Step 3 Select the SPDIF/HD page.
Field Name Description
Enabled Enables/disables the Microphone Pod.
Gain Use the slider to adjust the fixed Gain Control, setting the voice signal
to the desired level. The AGC reduces the volume if the audio is strong
and raises the volume if the audio is weak.
Echo canceller Enable the echo canceller when working with an external microphone
system that does not contain echo cancellation. Disable this setting
when working with an external mixer that handles echo cancellation. If
enabled check the field settings in Configuring the EchoCanceller
page 29, and configure if required.