User guide

'Initial Configuration' | 24
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Configuring Other Video Equipment
You may also access this page from a previous screen in the configuration.
Procedure
Step 1 In the Administrator settings menu select I/O connections.
Step 2 Scroll to Cameras.
Step 3 Select the DVI page.
Step 4 Set the fields as required.
Note: You may connect a camera to the DVI-I input, but it will be managed as PC content.
Step 5 Press Save.
Configuring the Monitor
Note: You can return to the Default Auto settings at any time by holding down simultaneously and .
Field Name Description
Enable Enables/disables the DVI input.
Name Enter the input name. The selected name will appear in the system area
of the display in addition to the input icon.
Contrast Sets black level.
Brightness Sets brightness level.
Auto Adjust In case of graphic issues, automatically adjusts the incoming image to
display correctly on the screen.
Reset In case of issues when connecting a PC to the system, resets the settings
in this page.