User guide

'Initial Configuration' | 19
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Step 3 In the General page set the fields as required.
Step 4 Press Save.
Setting the Time Zone
You have set some of these fields in the Quick Setup screens as they belong to the minimal setting
requirements to have the system function properly. You may also modify these settings in this
page.
Procedure
Step 1 In the Administrator settings menu select System.
Step 2 Select Time zone.
Step 3 Set the fields as required.
Step 4 Press Save.
Field Name Description
Day Enter the date.
Month Enter the month.
Year Enter the year.
Hour Enter the hour.
Minutes Enter the minutes.
Internet time Synchronize the system clock with the network clock, thus allowing you
to align devices connected to the Internet.
Field Name Description
Select the time zone to which the system belongs.
Enable daylight time Set to Yes to enable energy savings.
Start (dd/mm) Set the day and month of the current year when energy
saving will start.
Stop (dd/mm) Set the day and month of the current year when energy
saving will stop.