User guide

'Initial Configuration' | 9
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Enabling the Temporary License
Work with a temporary license for a limited period of time if you cannot obtain the license key
immediately.
Procedure
Step 1 After proceeding as described in Step 1 of Enabling the License at Setup page 8, press Start.
Use the Codec Unit with full features for a time limited mode of 24 hours. The remaining
activation time is shown in the system area of the screen, next to the time.
Figure 2-2 Temporary License Timeout
Step 2 After the temporary work time expires, the display shows the Enable license page. Insert the
license key.
Figure 2-3 Enable license Page
Step 3
Press Enable license.
Enabling the License from the Codec Unit Web Page
Procedure
Step 1 Start a web browser on your PC (Internet Explorer V7).
Step 2 Enable download management as described in Configuring the Codec Unit for Remote Upgrade
page 56.