Product Information

52
Chronograph functions
with split-seconds
The split-seconds function allows split
times to be recorded while the chronograph
is running.
1. Start the chronograph by pressing
pusher A.
2. To record a split time, press pusher C.
The split-seconds hand stops, indicating the
split time, while the chronograph continues
running.
NOTE: The split time should be read imme-
diately, since the chronograph totalizers
for hours, minutes and seconds continue
to measure the elapsed time.
While the chronograph is running, do not
leave the split-seconds hand stopped any
longer than is necessary to read the split
time, otherwise the functioning of the split-
seconds mechanism may be affected.
1. Normal position
When pressed in against the case
and screwed in, the crown ensures that
the watch is water-resistant.
3. To set the time
Pull the crown out to position 3. The small
seconds hand will stop. Set the correct time
by turning the crown forwards or backwards.
Accept by pushing the crown back to posi-
tion 1 to coincide with a given time signal.
Chronograph functions
Timing to within 1/4th of a second for
up to 12 hours.
Make sure the chronograph hands are
at zero (Pusher B).
Pusher A: Start – stop, start – stop etc.
Pusher B: Reset (after a stop).