Product Information

47
To set the date
Turn the crown. The date is displayed.
Immediately pull the crown out to position 2.
Display blinks.
a) Month: Turn crown quickly.
b) Date: Turn crown slowly.
Push the crown back to position 1.
NOTE: The month number is stored in
memory but is not continuously displayed;
it must be set correctly in order for the
calendar to function properly.
To select 12/24 h display
Pull the crown out to position 2.
Push the crown back to position 1 and
immediately pull it out again to position 2.
Turn the crown to select the mode:
12 h or 24 h.
Push the crown back to position 1.
POWER RESERVE/WINDING
The running time depends on how
long the watch has been worn. With a fully
loaded power reserve, the watch will run
for 120 days. It takes 4 to 9 months of
wearing the watch for it to reach the full
power reserve.
When there is only a little energy left, the
corresponding symbol (the small bar at the
center of the dial, directly beneath the time
display) starts to blink. The watch can
be wound manually at any time by turning
the crown forwards.
If the movement is completely stopped,
you can restart it by winding it for at least
15 seconds before setting the time.
If you wish to store the watch for a long
time, you may pull out the crown to posi-
tion 2. This will reduce its power consump-
tion considerably and increase the power
reserve up to 10 years, but the time of day
will be lost.