Product Information

39
QUARTZ CHRONOGRAPH WATCHES
CALIBER: 370, 541
SCREW-IN CROWN
Certain models are fitted with a screw-in
crown. With these models, the crown must
be unscrewed before using it to adjust any
settings. Following any adjustments, the
crown must be returned to position 1 and
screwed back in. Position 1 is the starting
point for all manipulations of the crown
on all models.
THE CROWN HAS 3 POSITIONS
1. Normal position
When pressed in against the case
(position 1) or screwed in, the crown
ensures that the watch is water-resistant
(if not damaged).
2. To set the date
Pull the crown out to position 2 and set
the date by moving the hour hand forwards
or backwards. To adjust by one day, the hour
hand must be moved by 24 hours. Push
the crown back to position 1.
To change time zones, summer/winter time
Pull the crown out to position 2 and turn
it forwards or backwards to set the desired
hour. The minutes and seconds remain the
same. Push the crown back to position 1.
3. To set the time
Pull the crown out to position 3. The small
seconds hand will stop. Set the correct time
by turning the crown forwards or backwards.
Accept by pushing the crown back to posi-
tion 1 to coincide with a given time signal.