Product Information

36
totalizers for hours, minutes and seconds
continue to measure the elapsed time. While
the chronograph is running, do not leave the
split-second hand stopped any longer than
is necessary to read the split time, otherwise
the functioning of the split-seconds
mechanism may be affected.
CHR Ad: Stopwatch with ADD timing
mode.
Start: Press pusher A.
Stop: Press pusher A again and read off
time.
Start again: Press pusher A again.
Stop again: Press pusher A again and read
off time.
Reset to zero: Press pusher B.
Chronograph functions
Make sure the chronograph hands are at
zero (Pusher B).
NOTE: this movements has no 1/10th of a
second counter. In this case the timekeeping
is precise to 1 second.
CHR SP: Stopwatch with Intermediate
times (SPLIT)
Start: Press pusher A.
Stop: Press pusher B, read off first
Intermediate (split) time.
Start again: Press pusher B to show elapsed
time. Repeat for further intermediate (split)
times.
Stop: Press pusher A, read off total elapsed
time.
Reset to zero: Press pusher B again.
NOTE: The split time should be read
immediately, as it continues after
10seconds and since the chronograph