User manual

Introduction
The Radlink CR Pro is a radiological device, that scans erasable phosphor plates
and transmits the image to an imaging onboard computer for review, archiving or
forwarding to other facilities for further evaluation and archiving. The CR Pro
handles plates of the following size:
Inch Standard
10in x 12in (254.0mm x 304.8mm)
14in x 17in (355.6mm x 431.8mm)
The CR Pro’s unique design makes it low maintenance as there are no mirrors or
galvanometers which are subject to frequent adjustment. Additionally, the CR Pro
mechanism is shock mounted to allow for a more reliable operation.
Multiple file formats are supported including TIFF, JPEG, PNG, BMP, DICOM
and raw formatted images for both reading and writing.
Multiple images may be sent simultaneously to PACS hosts. The embedded
DICOM Spooler handles multiple destinations and has DICOM broadcast
capability.
The CR Pro has relatively few connections making the installation process a
quick and efficient procedure.
It is recommended that the entire User Manual be read before operating the CR
Pro.
8
Monitor
CD-RW
LCD Display
Keyboard/
Trackball
Cassette
Slot