User manual

The priority combo box sets the study priority that dictates its priority in the

router send queue. This priority information is also passed along to PACS

which will affect the priority of the study at that host.

Use the Search button to perform a “Modality Worklist” patient search, a

“Remote PACS” patient search, or a “Local Database” patient search. After

the Patient Study Information is entered, then presses exit and performs

image scans by pressing the scan button. When the images are all scanned,

one should then press the Scan button which will send the images to the

PACS system. The Patient Search screen will allow one to automatically fill in

the “Patient Information” by using patient information in the PACS database.

The following describes how to use this feature. First click on the Patient

Search button from the patient info screen. The following screen appears:

Figure 3-28 – Search Screen

One selects a PACS Host in the PACS Host list shown above, enters the

appropriate search criteria for Patient Name, ID, and Sex then clicks the

Query button.

In the above example there is no PACS Host listed. One must be created

before the search can be accomplished. To add a PACS Host, click the

Settings button.