User manual

equipment or possibly adjacent surroundings.

• POWER – There are two models of the CR Pro, a domestic and European

Model. To avoid damaging your device, be sure the voltage selected matches

the required voltage for your Model.

CR Pro Domestic - 110 - 127VAC, 47 - 63Hz, 5.0A

Accommodates most of North and South America and

Eastern countries such as South Korea and Taiwan.

CR Pro European – 197 - 240VAC, 47 - 63Hz, 3.0A

Accommodates most of Europe, the Middle East and the Far East.

• LASER SAFETY – The CR Pro is a Class 1 Laser Device which utilizes a

50 mW solid state laser operating at 20 mW. The covers on the CR-Pro and

the enclosed inner housing protect the user from direct and indirect exposure

when the unit is operating. Under no circumstances are the covers to be

removed while the unit has power applied. Removing of the covers should be

done only by a qualified technician for servicing.

DANGER

LASER LIGHT

WHEN COVER REMOVED

AVOID DIRECT OR

INDIRECT EYE EXPOSURE

• FCC NOTICE “Declaration of Conformity Information” – This

equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause interference to radio communications.

Electromagnetic Compatibility (EMC) is the ability of items of electronic

equipment to function properly together in the electronic environment.

CLASS 1 LASER PRODUCT