User manual

Figure 2-10 – LAN Settings

Simply copy the Proxy server settings into the Radlink Fire Wall Settings.

If no settings are present and you have a Firewall, contact your LAN

administrator for the above settings.

It should be noted that the protocols being utilized by the Radlink system are

TCP and SOAP. The SOAP protocol uses an extended HTML packet header

for communications. Some firewalls do not allow HTML extensions. If that is

the case, request your LAN administrator to configure the firewall to allow

extended HTML packet headers.

Figure 2-11- Information Display Settings

The study information is displayed in the upper left side of the image display

area when the “Show Selections” radio button is selected. The items in the

study information is selectable by clicking the check boxes as shown above.

Required Fields