User manual

When the check box is checked, the router will cease to send images except
between the times selected.
Figure 2-6 – Scheduler Settings
In the above example, the router will only transfer images to the PACS hosts
between 5:45 PM and 11:45 PM.
Listener Port – The Listener Port is a port on the client machine that the
Radlink Router listens to for “Send Status” button clicks. The Listener Port
typically should not be changed. If the client already utilizes port 3000 in
some other client application, this port setting should be changed to another
available client port. If there is a port conflict, the router screen will not
appear when the “Send Status” button is clicked. This port is also utilized by
Image Acquire for sending images to the router.
Figure 2-7 – Raw Format Settings
The Raw File Format settings define the settings for reading a file with no
header information. The Raw File Format defines the rows, columns, and
depth of the raw bitmap image.
Raw Format
Rows – Number of rows in a Bit Map file.
Columns – Number of Columns in a Bit Map file.
Depth – Indicates the number of gray scale bits (8, 12, 15, or 16).
16