Installation guide

43
3. Radlink CR Pro Image Transfer AE Specifications
3.1 CR Pro Specifications
3.1.1 SCU Verification
This AE provides standard conformance as an SCU to the DICOM V3.0
SOP class for Verification as shown in Table 1.
Table 1: SOP Verification Classes
SOP Class SOP Class UID
Verification 1.2.840.10008.1.1
3.1.2 SCU Storage
This AE provides standard conformance as an SCU to the DICOM V3.0
SOP class for Computed Radiography Image Storage as shown in Table 2.
Table 2: SOP Storage Classes
SOP Class SOP Class UID
Computed Radiography Image
Storage
1.2.840.10008.5.1.4.1.1.1
3.2 Association Establishment Policies
3.2.1 General
The CR Pro creates Association Establishment Request for the server when
a Computed Radiography Image is to be sent. Maximum PDU size is 16K
Bytes.
3.2.2 Number of Associations
The CR Pro, acting as an Application Entity, can initiate one association
concurrently.
3.2.3 Asynchronous Nature
The default Synchronous Mode of operation is used on all Associations.
Asynchronous Mode is not supported.