Installation guide

3
• SAFETY – Read and follow all warning and safety instructions in this User’s
Manual and marked on the product. Not following the instructions may be
hazardous or illegal.
• LIFTING HAZARD – The CR-Pro weighs 198 lbs (90 kg)
Do not attempt to lift the unit by one person. Always seek help from two
additional able bodied persons.
Lifting heavy equipment may result in serious injury to personnel or
damage to equipment and possibly adjacent surroundings.
• LASER SAFETY – The CR-Pro is a Class 1 Laser Device which utilizes a
125 mW solid state laser. The covers on the CR-Pro and the enclosed inner
housing protect the user from direct and indirect exposure when the unit is
operating. Under no circumstances are the covers to be removed while the
unit has power applied. Removing of the covers should be done only by a
qualified technician for servicing.
• FCC NOTICE “Declaration of Conformity Information” – This
equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio communications.
Electromagnetic Compatibility (EMC) is the ability of items of electronic
equipment to function properly together in the electronic environment.