Installation guide

29
Care and Cleaning
To ensure optimum performance from the cassettes and to eliminate potential
image artifacts, it is recommended that the cassettes be cleaned and inspected
once a month. It may be necessary to clean the cassettes more frequently if the
unit is used frequently or if it is installed in an unusually dusty environment such
as a veterinary clinic. The following procedure should be followed to clean and
inspect the cassette:
1. Inspect the outside of the cassette for physical damage. If damage is
observed, contact Radlink Customer Support at [phone] for
information regarding available repair services.
2. Place the cassette on a flat surface with the Snap-Lock retaining clip
facing upward (see photo #1).
Photo 1
3. Use the thumb on one hand to slightly lift the Snap-Lock while inserting a
small flat-bladed screwdriver between the cassette and the phosphor plate
(see photo #1).
Snap-Lock Clip