System information

Page 36 Version 1.0
9.7 Common Interface Manager
You can insert a maximum of two Common Interface Modules for
decoding Pay-TV program packages.
• Insert the Ci-module into the slot with the coloured label
facing upwards.
• Insert the Smartcard into the Ci-module with the gold chip
facing upwards.
The Ci-Module is automatically initialised and the program
package is decoded. In menu ”7. Common Interface
Manager” you can call up the status of the inserted Ci module and Smartcard.
10 Trouble Shooting Your digital Receiver
NOTE:
Digital communications involve the simultaneous transfer and processing of large amounts of data.
Changing channels may takes longer in comparison to analogue devices.
An hourglass appears on screen with the message “Please Wait” while the receiver changes channel.
Problem Possible Causes Solution
Noise, but Satellite system is faulty Check cables and
screen menu or incorrectly set up, antenna, set up antenna
available faulty LNB again, check LNB
High levels of signal loss Replace cables or use a
in cable signal booster
Faulty LNB Replace LNB
Faulty connection Repair connection
(Water/corrosion
damage)
No stereo sound Wrong cable connecting Check SCART cable
TV and receiver
Remote control Batteries exhausted Replace batteries
does not respond
Remote control not Hold remote control in
pointed at receiver correct position
11 Recycling and Disposal
Please dispose of the device, packaging such as polystyrene and all batteries in accordance with your
local regulations and recycle wherever possible. Follow all relevant regulations and dispose of the
materials at the correct locations. Consult the relevant regulations available from your local
environmental protection agency or similar.
Programming Your Receiver