Instruction manual

Page 8 Version 1.0
5 Installing Your Receiver
5.1 Before You Start
CAUTION:
Do not place the receiver near any heat sources or in strong sunlight.
Protect all cables from damage caused, for example, by sharp edges.
This appliance must only be used with a mains voltage of 230 V (± 10%), 50 Hz.
Install the antenna in accordance with the manufacturers instructions.
The following information is necessary for programming the digital components:
- your time zone (= deviation from GMT – see appendix),
- summer time yes/no,
- picture format for your TV,
- The appropriate LNB oscillator frequency (referred to in the “LNB Local-Frequency” menu),
- Programme frequencies and polarities for manual programming (available in satellite magazines,
specialist stores).
You must program the EPSILON 3 ci before use. Full instructions are provided in Section 6. If you are in a
hurry and if you already have experience programming receivers, you can use the Quick Guide to get
started.
Installing Your Receiver