Instruction manual

Page 26 Version 1.0
In addition to the programme overview, the following information is also available:
Video: Content:
4:3 Feature Film / Drama
16:9 News
16:9 (pan vector) Show / Gameshow
> 16:9 Sport
Kids / Teens
Audio: Music / Dance
Single mono Art / Culture
Dual mono Social / Politics / Economy
Stereo Education / Learning
Multilingual Leisure
Surround Special
EBU Information: Suitability:
Teletext Subtitles Over 7 years of age
Teletext
Subtitles
Subtitles (4:3)
Subtitles (16:9)
Subtitles (2.21:1)
Press the Exit key to stop the programme operation.
Use the channel select and volume keys , , or to select the appropriate
options and display the additional information.
Press the Exit key to exit the programme overview.
9 Programming your Remote Control
You can programme the remote control in two ways: you can either use the three-digit manufacturers setup
code (listed by manufacturer at the back of this guide) or you can perform a systematic search.
Method 1: Enter the Manufacturers Setup Code
Step 1: Press and hold down the SET key for approximately three seconds until
the red LED lights up.
Step 2: Press one of the following device keys to set the desired device:
SAT Analogue Receiver
DVB Digital Receiver
TV Television
VCR Video Recorder.
Step 3: Find the manufacturers code for your device in the list of codes. If there
is more than one code, you will need to try each one until your remote
control works with your device.
Make sure that the device is switched on.
Point the remote control at the device.
Programming Your Remote Control