Instruction manual
Version 1.0 Page 17
GB
6.2.7 Checking the Signal Strength
In order to receive the best quality signal, your satellite antenna must be correctly aligned.
• Open the Main Menu and select ”General Settings”. Select “Signal strength“
using the CH key and confirm.
Providing you can receive at least one channel, the following menu appears on
your screen:
5
4
3
2
1
4:3
SNR:10.490 (LOCK)
GMT
Main Menu
General Setting
OFF
English
TV Aspect Ratio
Summer Time
Time Setting
Language
Previos Menu
Signal Strength
The signal strength indicator is divided into three separate sections: red, yellow and
green. These colours represent the strength of the signal:
Red: BAD,
Yellow: FAIR,
Green: GOOD.
The following information also appears:
“(LOCK)” and a number for ”SNR” (Signal Strength) or
„(UNLOCK)” and „0.000” for ”SNR” if there is no signal.
As the strength of the signal increases, the acoustic signals which accompany the
on-screen information become shorter and more rapid.
• Carefully adjust the position of your satellite antenna until the signal strength is
completely green.
Congratulations! You are now receiving the best possible signal quality.
If you cannot find a signal, check all connections between your receiver and the
antenna as well as all receiver settings.
• Press the Exit key to close this menu.
Programming Your Receiver