Instruction manual

Page 16 Version 1.0
6.2.5 Decoder Status – System Information
You can use this option to get information on the current status of your receivers software.
• Open the Decoder Status menu and select ”System Information”. Press the
Menu key to confirm this.
2
1
Date
15.05.1999
Revision
EP_990401
Firmware
2.08A - 0.12.0.30
Decoder Status
System Information
Clear All Channels
Main Menu
Previos Menu
6.2.6 Common Interface
This option allows you to see which CA modules are currently being used in CI slots 1 and 2.
• In the Main Menu, select ”Common Interface”.
You now see details of which cards are in the card slots - if there is a card in the
slot, its code version appears. If no cards are present, ”Not Installed” appears:
Slot 1 : Not Installed
Slot 2 : Not Installed
6
5
4
3
2
1
Decoder Status
General Setting
Exit
Main Menu
Common Interface
Transponder Edit
Advanced Search
Standard Search
Please note that it takes approximately 30 seconds after you insert a card for its
details to appear on-screen.
Programming Your Receiver