Instruction manual

Page 14 Version 1.0
• Open the flap on the left side of your receivers front panel.
• Insert the CAM all the way into the Common Interface Slot (CI Slot).
• Insert the SmartCard into the module with the chip facing upwards and away
from the receiver.
• Close the flap on the front of the receiver.
The Advanced Search feature allows you to program additional channels individually or to change existing
settings. You must edit each menu option separately for each group.
The procedure for creating settings is exactly the same as before. Simply change the settings as you did for
the Standard Search making sure you have all the necessary information before you begin (see Section 5.1).
Open the Main Menu and select ”Advanced Search”. The following screen appears
together with fields for changing settings:
5
4
3
2
1
OFF
A
Universal
ASTRA
Horizontal
Next
22kHz
DiSEqC
LNB Local-Frequency
Satellite 1
LNB Polatity
Main Menu
Previos Menu
Advanced Search
10
9
8
7
6
AUTO
AUTO
27.500
12168
Audio PID
Video PID
Symbol Rate
Down Frequency
PCR PID
AUTO
Start Search
11
Main Menu
Previos Menu
Advanced Search
• Proceed through each of the menu options making changes as you did for the
Standard Search.
• Select ”Start Search” and press the Menu key to confirm.
You can monitor the search progress visually by means of the blue progress bar or by means of the
acoustic signals.
• Press the Exit key to close this menu.
Programming Your Receiver