Instructions / Assembly

Fore-Grip Bolts (C)
Sha Washer & Knob (B)
MODEL: 90111/90211
Sha Bolt (A)
Detailed Assembly - No Tools Required
Hardware
Connect Sha
Aach Shovel Head
Aach Fore-Grip
Insert the ribbed end of the Lower Sha into the
shovel head opening. Apply force downward unl
you hear clicking and meet rm resistance from
the shovel head. Once this step is completed, the
sha will be permanently axed to the shovel
head. No tools or hardware are needed for this
step.
Remove the pre-aached Fore-Grip Wing Nuts (D)
from the Fore-Grip Bolts (C). Posion Fore Grip on
desired Sha posion. Once in posion, re-thread
the Fore-Grip Wing Nuts (D) onto the Fore-Grip
Bolts (C) and ghten unl secure.
Insert the Upper Sha into the Lower Sha.
Thread the Sha Bolt (A) through the aligned hole.
Secure the Sha Bolt (A) by threading the Sha
Washer and Knob (B) unl ght.
Step One
Step Two
Step Three
No Tools Required
For more help with assembly visit Radiusgarden.com/assembly
18” SNOW SHOVEL
Fore-Grip Wing Nuts (D)
1
2
3
USE &
CARE
1. Insert Upper Sha
into Lower Sha and
ghten.
2. Insert Lower Sha
into shovel head rmly
unl click is heard.
3. Aach Fore-Grip
to desired posion.
STORAGE: When not in use for extended periods over me, remove the fore-grip and
store seperately from the shovel either by hanging or laying at. This will extend the
life of the fore grip and reduce heat deformaon during summer months.
2 YEAR LIMITED WARRANTY
FOR QUESTIONS OR WARRANTY CLAIMS CONTACT RADIUS TOOLS AT
radiusgarden.com or call Toll Free 1-800-633-1501
UPPER GRIP
SHAFT BOLT,
SHAFT WASHER,
& KNOB
FORE-GRIP BOLT,
WINGNUTS.
UPPER SHAFT
LOWER SHAFT
BLADE
FORE-GRIP
SCRAPER
BLADE
SHAFT
OPENING
1 pcs
1 pcs
2 pcs
2 pcs