Specifications

Troubleshooting & Error Messages
Page 33
55
PARITY ERROR IN SEGMENT ... DOS
Problem: This could be a software error (reading a nonexistent memory area) or
a true hardware failure.
Solution(s): Attempt to repeat the error. If the error occurs during the execution
of your own proprietary software, verify that the memory location
specified in your software is valid.
PRESS A KEY TO REBOOT BIOS
Problem: A C: drive partition exists but is not set active.
Solution(s): Run your operating system disk partitioning program (like FDISK)
and set the primary partition active.
REAL TIME CLOCK ERROR - RUN SETUP BIOS
Problem: The battery-backed TOD clock is incorrect.
Solution(s): Run the BIOS setup program to determine what is wrong, and correct
it. If the error occurs repeatedly, the EPC's battery has failed.
You should attempt to solve the problem yourself. If you are unable to solve the
problem, please call RadiSys Technical Support.