Specifications

Error Messages
EPC-100 Hardware Reference D-1
Appendix D - Error
Messages
Introduction
Boot Failures
The System BIOS attempts to display an error message on the VGA and halts
when it encounters the following error conditions:
1. Fixed disk error
•
No drive connected
•
Configured for 0 cylinders
•
Controller reset failed
•
Drive not ready
•
Track 0 seek timed out
•
Drive initialization failed
•
Drive recalibration failed
•
Last track seek failed
2. Video error
•
Color/Mono switch not set correctly
3. Timer error
•
System timer (0) failed
4. Diskette error
•
Floppy type does not match setup