Specifications

Connectors
EPC-100 Hardware Reference C-4
SVGA Connector
The SVGA monitor port is a DB-15 connector defined as
follows:
Pin Signal Pin Signal
1 Red 9 (key)
2 Green 10 Ground
3 Blue 11 (not used)
4 (not used) 12 (not used)
5 Ground 13 Horizontal sync
6 Ground 14 Vertical sync
7 Ground 15 programmable
8 Ground output
Table C-5. DB-15 Pin-Out.
RJ45 Connector
The DTE RJ45 phone jack that supplies the 10Base-TX/100Base-TX interface to the
Ethernet controller is defined as follows:
Pin Signal
1 Tx+
2 Tx-
3 Rx-
4 No connect
5 No connect
6 Rx+
7 No connect
8 No connect
Table C-6. RJ45 Phone Jack Pin-Out.