Specifications

BIOS Configuration

EPC-100 Hardware Reference 3-24

Power Management Menu

The options in this menu provide control over the power management facilities. As

the screen graphic below shows, only about one-half of the Power Management

Menu Screen entries are visible at any one time; however, for completeness, all of the

Power Management Menu entries are listed and annotated below.

System BIOS Power Management supported states are: Fully On, Standby Mode

(partial power reduction), and Suspend Mode (maximum power reduction).

Figure 3-11. Advanced Power Management Sub-menu.

Power Savings

This option enables and selects the kind of power management, or it disables power

management. The options are: “Off”, “Customize”, “Maximum Performance”, and

“Maximum Power Savings. The default is “Off”.

Item Specific Help

F1 Hel

↑↓

Select Item -/+ Chan

e Values F9 Setu

Defaults

ESC Exit

←→

Select Menu Enter Select Sub-Menu F10 Previous Values

<Tab>, <Shift-Tab>, or

<Enter> selects field.

Power Savings: [Off]

Standby Timeout: Off

Auto Suspend Timeout: Off

Hard Disk Timeout: Off

ACTIVITY CONTROL DETECTION

IRQ1(Break Event): [Enabled]

Main Advanced Power Exit

IRQ6(System Event): [Disabled]

IRQ3(Break Event): [Disabled]

IRQ4(Break Event): [Disabled]

IRQ7(System Event): [Disabled]

IRQ8(Break Event): [Disabled]

IRQ9(System Event): [Disabled]

IRQ5(System Event): [Disabled]

IRQ9(System Event): [Disabled]