Specifications

BIOS Configuration
EPC-100 Hardware Reference 3-16
Integrated Peripherals Sub-menu
The options in this sub-menu are used to configure the onboard serial and parallel
port and disk controllers.
Figure 3-7. Integrated Peripherals Sub-menu.
COM A port
This option is used to configure the serial port labeled on the front panel as “COM
A”. The choices for I/O base addresses and IRQs are: “Disabled”, “3F8, IRQ4”,
“2F8, IRQ3”, “3E8, IRQ4”, “2E8, IRQ3”, and “Auto”. “Auto” causes the System
BIOS to choose a base address and IRQ setting that avoids conflicting with the other
ports. The default I/O base and IRQ for this COM port are “3F8, IRQ4”.
COM B port
This option is used to configure the serial port labeled on the front panel as “COM
B”. The choices for I/O base addresses and IRQs are: “Disabled”, “3F8, IRQ4”,
“2F8, IRQ3”, “3E8, IRQ4”, “2E8, IRQ3”, and “Auto”. “Auto” causes the System
BIOS to choose a base address and IRQ setting that avoids conflicting with the other
ports. The default I/O base and IRQ for this COM port are “2F8, IRQ3”.
PhoenixBIOS Setup - Copyright 1985-96 Phoenix Technologies Ltd.
Item Specific Help
F1 Hel
p
↑↓
Select Item -/+ Chan
g
e Values F9 Setu
p
Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Previous Values
<Tab>, <Shift-Tab>, or
<Enter> selects field.
COM A port: [3F8, IRQ4]
Integrated Peripherals
LPT Mode: [Output Only]
LPT port: [378, IRQ7]
COM B port: [2F8, IRQ3]
Diskette Controller: [Enabled]
Local Bus IDE adapter: [Enabled]Local Bus IDE adapter: [Enabled]
Onboard Ethernet controller: [Enabled]
Onboard SCSI Controller: [Enabled]