Specifications

BIOS Configuration

EPC-100 Hardware Reference 3-3

Main Setup Menu

The Main Setup Menu is shown below:

Figure 3-2. Main BIOS Setup Menu

System Time:/System Date:

These values are changed by moving to each field and typing in the desired entry.

The TAB key moves from hours to minutes to seconds, or from months to days to

years.

Diskette A:/Diskette B:

This field identifies the type of floppy disk drive installed as the A:/B: drive.

Possible settings are “Not Installed”, “360 KB, 5¼””, “720 KB, 3½””, “1.2 MB,

5¼””, “1.44 MB, 3½””, and “2.88 MB, 3½””. The BIOS defaults to “Not Installed”

for drive A: and B:.

IDE Adapter 0/1 Master/Slave: Sub-menus

These fields are headings for menus that allow entering complete disk drive

information. Once the information is entered for the drive, the entry in the Main

Menu shows the drive selected. See “IDE Adapter Sub-menu” on page 3-5 for more

information.

Item Specific Help

System Date: [03/01/96]

IDE Adapter 0 Master: (C: 1440 Mb)

Video System: [EGA / VGA]

Memory Cache

Memory Shadow

System Memory: 640 KB

Extended Memory: 31 MB

F1 Hel

↑↓

Select Item -/+ Chan

e Values F9 Setu

Defaults

ESC Exit

←→

Select Menu Enter Select Sub-Menu F10 Previous Values

<Tab>, <Shift-Tab>, or

<Enter> selects field.

System Time: [16:17:18]

Main Advanced Power Exit

IDE Adapter 0 Slave: (None)

Diskette A: [Not Installed]

Diskette B: [Not Installed]

Boot Sequence: [A: then C:]

Numlock: [Off]

IDE Adapter 1 Master: (None)

IDE Adapter 1 Slave: (None)