Specifications

BIOS Configuration
EPC-100 Hardware Reference 3-2
BIOS setup is accomplished by making selections from a series of menus, shown in
Figure 3-1.
Figure 3-1. BIOS Setup Screen Menu Map.
Access to the setup screen is possible only during a short time during bootup when a
message is displayed indicating that the "F2" key may be pressed to enter setup. This
provides consistency of operation across all supported operating systems, and forces
a direct correspondence between the displayed System BIOS setup settings and the
hardware.
The up and down cursor (arrow) keys to move from field to field while the right and
left arrows move from menu to menu, as noted in the menu bar at the top of each
setup screen. If the arrow keys are used to leave a menu and then return, the active
field is always at the beginning of the menu.
Fields with a triangle to the left are sub-menu headings. Press Enter when the cursor
rests on one of these headings to reach that sub-menu.
Most fields consist of a series of selectable choices. Position the cursor at the field
and use the + and - keys on the numeric keypad to rotate through the available
choices. Once the desired entry appears, use the up and down arrow to move to the
next field.
The fields in each menu and sub-menu are explained below the menu. Additional
help information is available in the help area on the Setup screen.