Specifications

Troubleshooting and Error Messages
55
Page 71
PARITY ERROR IN SEGMENT ...
DOS
Problem: This could be a software error (reading a nonexistent
memory area) or a true hardware failure.
Solution(s): Attempt to repeat the error. If the error occurs during the
execution of your own proprietary software, verify that the memory location
your software specifies is valid.
PRESS A KEY TO REBOOT
BIOS
Problem: A drive assigned as drive ‘C’ exists but is not set active.
Solution(s): Run your operating system disk partitioning program (like
FDISK) and set the primary partition active.
REAL TIME CLOCK ERROR - RUN SETUP
BIOS
Problem: The battery-backed TOD clock is incorrect.
Solution(s): Run the BIOS setup program to determine what is wrong,
and make corrections. If the error occurs repeatedly, the CMOS battery has
failed.
SYSTEM CMOS CHECKSUM BAD -- RUN SETUP
CMOS
Problem: One of the entries in the CMOS RAM is incorrect.
Solution(s): Run the BIOS setup program to determine what is wrong,
and make correction. If the error occurs repeatedly, the CMOS battery has
failed.