Specifications

22
Getting Started
Page 17
Select the proper setting for your floppy disk drive by
choosing one of the following:
for 5-1/4” drives 360K or 1.2 MB
for 3-1/2” drives 720K or 1.44 MB or 2.88 MB
You can set up an A drive and a B drive using the proper
cable. The BIOS defaults to Not Installed for drive A: and
Not Installed for drive B:.
> IDE Adapter 0
Master/Slave Sub-
menus
These fields are headings for sub-menus which allow you
to enter complete disk drive information or auto-type the
drive. Once you set up drive information, the Main Menu
shows the drive designation and size. For more
information, refer to the description of the IDE Adapter
Sub-menus later in this chapter.
Video System
Select the video output you are using. In the majority of
cases, you will select EGA/VGA. Other options include
CGA 80x25 and monochrome. The default is EGA/VGA.
>Memory Shadow
Sub-menu
The Memory Shadow Sub-menu allows you to copy
information from ROM (on the ISA bus) into RAM and
access the information in this alternate location. For more
information, refer to the section which explains the
Memory Shadow Sub-menu.