Specifications

22
Getting Started
Page 13
On-board Jumper Usage
JP1 BB ENBL Use to enable writes to the boot block in the BIOS.
Default is not populated.
JP2 Manufacturing
Loop
Jumper for enabling manufacturing loop.
Default is not populated.
JP3A,B,C Flat Panel BIOS
Select
3-bit selection for panel type. Install jumpers for all ‘0’ bits.
Default is not populated.
Table 2-1. EPC-30 Jumper Settings.
Figure 2-2. EPC-30 Layout.
Connecting the SIMM and Peripherals