Specifications

CC
VGA Interface
Page 9
CIRRUS 624X V1.0, 640X480X256
CIRRUS 624X V1.0, 800X600X16
CIRRUS 624X V1.0, 800X600X256
5. Move the cursor to highlight the correct driver. Then press
[Enter].
6. Continue with the remainder of the setup procedure.
To install the Windows 3.1 drivers from within Windows, proceed
as follows:
1. Ensure that Windows 3.1 is already installed on your computer.
Start Windows.
2. From the Main window of the Program Manager, run the
Windows 3.1 Setup program.
3. Select ‘Change Systems Settings...’ from the Options menu.
4. Click on the down arrow at the right side of the Display: line.
Scroll to the end of the list of available display drivers and select
‘Other display (Requires disk from OEM).’
5. Insert the Windows display driver diskette into drive ‘A’ and
type ‘A:\’ as the pathname. Then click on ‘OK.’
6. You will see a list of available drivers with their associated
resolutions, such as:
CIRRUS 624x v1.0, 1024x768x16
CIRRUS 624x v1.0, 640x480x16
CIRRUS 624x v1.0, 640x480x256
CIRRUS 624x v1.0, 640x480x64K
CIRRUS 624x v1.0, 800x600x16
CIRRUS 624x v1.0, 800x600x256
7. Move the cursor to highlight the correct driver. Then click on
‘OK.’
8. Continue with the remainder of the setup procedure. Changes
you make will not take effect until you restart Windows.
This completes Cirrus Logic video driver installation. For additional
information about the driver software, contact Cirrus Logic.