Specifications

CC
VGA Interface
Page 2
Installation
The installation utility facilitates smooth installation of the display drivers
and utility software. The menu-driven installation program allows you to
select and install only those display drivers for software and applications
currently in use.
NOTE: Some display drivers require that the driver vendor’s application
program be installed on the system prior to loading the Cirrus Logic SVGA
display drivers. In other cases, you load the display driver during the
vendor’s product installation process. Please review the driver product
section below for specific instructions before you run the installation
program.
This appendix assumes that you will use your floppy disk drive carrying the
drive ‘A’ designation.
DOS Installation
The diskette labeled VGA Disk contains the DOS installation
utility. To install the desired display drivers and utilities, insert the
diskette into the ‘A’ drive, then type the following:
A:
INSTALL
This begins the installation for the English version of the software.
Follow the instructions on the screen to install the listed display
drivers and Cirrus Logic software. The installation process asks you
the destination directory, then gives you the option to install the
Cirrus Logic GD624x utilities, as well as several other application
drivers. You need only to choose the utilities. Press the space bar to
toggle the selection field to ‘Yes.’ At any time, you can press ESC
to abort the installation process and return to DOS.
Contacting Cirrus Logic
If there are any newer versions of the software, they will be
available on the Cirrus Logic BBS or web site.
Cirrus Logic’s BBS is a WILDCAT! BBS. The phone number is
[phone]. The BBS can handle modems running up to 28.8K
baud. The modem should be set to NO parity, 8 data bits, 1 stop bit.
Before you are able to download software, you must join the
conference(s) for the product(s) that you are interested in.
The URL for the Cirrus Logic web site is http://www.cirrus.com.